|
Post by fast65 on Nov 12, 2010 16:30:14 GMT -1
Having finished the turbo install as things have gone along ive got far too much power a T1 box can handle so i could have, 1 fitted an uprated bus box 2 uprated a T1 box as far as you can go and keep my fingers crossed 3 fit a porsche box ive decided to go for the porka box a G50 box from a 1990 911 these can take at least 550 bhp so that should beable to take some abuse ;D the proka box next to a standard T1 box now ive got to make this lot fit well after 20mins with the plasma cutter does this another 90 mins with the help of a 9" grinder gets this thats it so far got to get some metal stock and start rebuilding the chassis with the box in cheers andy
|
|
|
Post by captainalexis on Nov 12, 2010 16:39:09 GMT -1
Astounding! The porka box looks Sooo big compared to the type 1. Is that my type 1 or what you took out?
|
|
|
Post by fast65 on Nov 12, 2010 16:50:44 GMT -1
lol the porka box is massive and weighs a ton but has the same bolt pattern as a bug engine and yes that your box cheers andy
|
|
|
Post by captainalexis on Nov 13, 2010 0:56:58 GMT -1
Wow I have a very small box... that is not to say it is not magnificent in it's own way! Lol
|
|
|
Post by MR AFWO ! on Nov 13, 2010 7:51:39 GMT -1
now that sure is a huge box ya got there buddy.
|
|
|
Post by judgie on Nov 16, 2010 13:39:39 GMT -1
that'll do it. same box as Russ Fellows runs in his 700bhp street car. very strong and can pull well over 160mph if you have the power to do it. guessing you are going to go coil over now as you have chopped the torsion bar houseing out?
|
|
|
Post by fast65 on Nov 16, 2010 17:31:49 GMT -1
hi i went coil over a while ago im thinking of doing the same on the front end so i can go round corners:). i should have about 500bhp so maybe 150 lol
cheers andy
|
|
|
Post by fast65 on Nov 22, 2010 17:47:56 GMT -1
cheers guys 944 rear end differences post 87 pre 87 just incase you wanted to know cheers andy
|
|
|
Post by fast65 on Dec 28, 2010 15:15:38 GMT -1
getting some were now front and rear mount done ive got fit the IRS brackets and sort the shifter out put some metal back were i cut it out and then i have to do is clean and paint it all cheers andy
|
|
|
Post by deaddog on Jan 7, 2011 10:40:52 GMT -1
nice i'll keep an eye on this! you gonna do vwdrc or owt ? / shame not to
|
|