Birdy
Junior Member
Kids dont judge
Posts: 97
|
tips
May 5, 2009 18:59:40 GMT -1
Post by Birdy on May 5, 2009 18:59:40 GMT -1
havin trouble takin off my tinware the screws either wont move or the heads are snappin off anyone who can offer help? i may need to drill them n re thread?
|
|
Dubsy
New Member
Posts: 19
|
tips
May 8, 2009 2:17:19 GMT -1
Post by Dubsy on May 8, 2009 2:17:19 GMT -1
Easiest way is heat the screw head red let it cool and it'll come out easy. If you have no heat use Vise grips and a screwdrive together if they're just tight but they'll still snap if seized and unheated. I can drill and re-thread them for you if you need it doing.
|
|