|
|
judgie
Dec 30, 2008 22:45:13 GMT -1
Post by BUBBABOOBOO on Dec 30, 2008 22:45:13 GMT -1
what followers and cam gear were you going to use ? and i am going for a 1600 with 13psi  thanx |
|
|
|
judgie
Jan 3, 2009 14:03:52 GMT -1
Post by judgie on Jan 3, 2009 14:03:52 GMT -1
if your staying with a 1600 and 13psi i would just use stock cam and lifters with poss some bolt up 1.25 rockers. remember to put some stronger valve springs in to counter the boost on the back of the valve.
if you go to a bigger cam then you will deffo need to think about uprateing the bottom end.
13psi is going to double your power in a 1600 and thats going to be right on limit of all the stock bottom end. even so i would get the crank flywheel 8 dowled and get a cr-mo gland nut/ washer.
cheers rob
|
|
|
|
judgie
Jan 24, 2009 18:45:12 GMT -1
Post by BUBBABOOBOO on Jan 24, 2009 18:45:12 GMT -1
hi mate did try and call you will call you on monday or could you pm me please , also can you make up a header for me or should i just get one from vw speed shop ?
|
|
