|
Post by bleedingmoody on Jun 6, 2007 20:33:22 GMT -1
|
|
|
Post by lammyrider on Jun 6, 2007 20:52:15 GMT -1
yours is about the same height as mine ;D
|
|
|
Post by bleedingmoody on Jun 8, 2007 14:34:46 GMT -1
gave underneath a good clean >:(there was soooo much shit under there you wouldn't believe, you can see some of it on the floor gear box and engine went back in and it looks like it might be a bit lower when it's back on it's wheels
|
|
|
Post by BUBBABOOBOO on Jun 8, 2007 17:34:03 GMT -1
good work
|
|
|
Post by baza on Jun 8, 2007 18:41:45 GMT -1
Good work Moody, like the panel, how do you get the wheels on when its that low at the back?
|
|
|
Post by bleedingmoody on Jun 9, 2007 8:21:25 GMT -1
good question ;D you have to let the tyres down then try and squeeze the wheel out between the arch and the brake drum, if it don't come out you have to undo the shock and drop it down
|
|
|
Post by 67split on Jun 9, 2007 16:37:15 GMT -1
Looking good me old mukka! Looking forward to the seein the finished article!! As for changing those back tyres? Sounds like tyre weld to me!! Ive already tried to change mine and they aint comin off!!!!! The joys of a low bus!!!!! Well worth it though!!
|
|
|
Post by maccyd on Jun 10, 2007 9:36:46 GMT -1
good question ;D you have to let the tyres down then try and squeeze the wheel out between the arch and the brake drum, if it don't come out you have to undo the shock and drop it down I think I'm right in sayin u need a decent sized metal bar to lever the swing arm down enuf to get the wheel off. Think that was wot Bobby told me when I asked the same question bout me broz bus. Sounds like hassle but all worth it when the stance looks sooo0oo goood ;D
|
|
badpanel
New Member
Don't do shiney!!!
Posts: 30
|
Post by badpanel on Jun 10, 2007 21:14:24 GMT -1
Looking good Bud! Looks like my panel may need another tap with the lowering stick!!
|
|
|
Post by bleedingmoody on Jun 11, 2007 15:34:11 GMT -1
yours is low enough mine wont be anywhere near that, I'm not even as low as Robs
|
|
badpanel
New Member
Don't do shiney!!!
Posts: 30
|
Post by badpanel on Jun 11, 2007 18:08:54 GMT -1
Make it happen!! What beam are you havin?
|
|
|
Post by MR AFWO ! on Jun 11, 2007 19:18:40 GMT -1
lookin forward ta seeing it in all its glory yo, plus its good ta see a flik of that panel on its wheels.
|
|
|
Post by bleedingmoody on Jun 13, 2007 12:20:41 GMT -1
|
|
|
Post by Dodgy on Jun 13, 2007 13:27:51 GMT -1
Is that your true speed ? or is your skinny rubber on the front having somewhat of an effect We need to do a speed check on Saturday Morning via phone between Vicks and Paula. I will take my GPS and we can get an accurate speed
|
|
|
Post by vicktori on Jun 13, 2007 13:57:19 GMT -1
|
|