|
Post by vwbugster on Jan 7, 2007 21:03:43 GMT -1
Given up with my chrome running board trim and clips. going to send em back on monday. Fitted my Chrome T-Bars at the rear though so chuffed about that! ;D Fitted some H4 halogen bulbs which was ok but had to try and fix a connection for one of my indicator bulbs. Pain in the ass! Had to totally dismantle the head lamp to get at the indicator bulb!!!!!!!! which meant unscrewing the beam adjustment screws completely!!!! So here is my question..... now my lights are back and all working how do i adjust the beam back to how it should be? Any tricks for adjusting the beam or is this one for Judgie to sort?
|
|
|
Post by lammyrider on Jan 7, 2007 23:33:43 GMT -1
god knows dude ;D i always fine bugging the fine people on VZi for stuff like this works wonders ;D
|
|
beaniebug
Full Member
I've got a dub....... Looks ratty!
Posts: 172
|
Post by beaniebug on Jan 8, 2007 8:09:14 GMT -1
The screws on the front of the headight housing will adjust the beam direction One will adjust up and down, t'other left and right..... or at least I think thats correct I can't remember the light type you have Pete - if you get stuck give me a yell and i'll pop round matey!
|
|
|
Post by grumpyoldgit on Jan 9, 2007 18:32:02 GMT -1
If you have Bosch headlamp:
Vertical adjustment - turn upper screw Clockwise = beam swings down Anticlockwise = beam swings up
Horizontal adjustment - turn right hand screw Clockwise = beam swings to left Anticlockwise = beam swings to right
If you have Hella headlamps
Vertical adjustment - turn left hand screw Clockwise = beam swings up anticlockwise = beam swings down
Horizontal adjustment - turn right hand screw
Clockwise = beam swings to right Anticlockwise = beam swings to left
Hope this helps - found it in a book i have
|
|
|
Post by vwbugster on Jan 10, 2007 12:52:56 GMT -1
nice one I will give this a try!
|
|